Genelec, a manufacturer of professional audio monitoring, will be showcasing two Smart IP loudspeaker models at the forthcoming ISE show in Amsterdam. The 4420 and 4430 loudspeakers combine both sound quality with single cable convenience, and their onboard Smart IP technology provides scalable power, audio and loudspeaker configuration, supervision and calibration features via a standard CAT cable. Smart IP offers system designers, integrators and installers an easy cost-effective solution for guaranteeing high-quality audio across entire installations.
Having been unveiled before a select audience of specially invited Nordic integrators in Helsinki in December, the 4430 will be making its ISE debut alongside its new and even more compact 4420 sibling—with more Smart IP models expected to be added to the family in the future.
The 4420 and 4430 are compatible with both Dante™ and open IP standards including AES67 and ST2110-30 and derive power via PoE and PoE+ Power-over-Ethernet formats. Both models feature a single rear panel CAT connector which also allows access to Genelec’s Smart IP Manager—a software tool that allows installers to configure an almost unlimited number of rooms, zones, loudspeakers and audio channels, and includes device discovery, a versatile room equalization toolset, system organization and status monitoring. This enables installers to deploy Smart IP loudspeakers even on highly complex, acoustically challenging projects.
While Smart IP Manager is designed specifically for installers to use during setup and configuration, the 4420 and 4430 can be integrated into house automation systems using a public API command set—allowing the end-user instant access to volume, power on/off, loudspeaker activity and a selection of pre-programmed audio settings. Smart IP supports uncompressed low-latency audio streaming directly into each loudspeaker, with loudspeaker synchronization to sub-microsecond level for solid acoustic imaging. Streams can be managed by both Dante Controller and Dante Domain Manager software, as well as legacy balanced line analog audio. This connectivity allows both IP control of an analog source or use of analog audio as a failsafe backup.
In terms of technical specification, the 4420 stands just 226 mm tall yet offers a frequency response of 55 Hz – 39 kHz (-6 dB) via a four-inch woofer and 3/4-inch metal dome tweeter, producing a max SPL of 100 dB via onboard 50 W Class D amplifiers for each driver. In comparison, the 4430 measures 285 mm in height, delivers 45 Hz to 39 kHz (-6 dB) via a five-inch woofer and 3/4-inch tweeter and produces a max SPL of 104 dB via its onboard 50 W Class D stages.
Manufactured sustainably to offer low power consumption, reliability and long life, the 4420 and 4430 enclosures are produced from recycled aluminum, are available in black, white or 120 custom RAL colors, and are compatible with Genelec’s range of mounting accessories to allow both models to be floor, ceiling, wall or truss mounted.
Genelec will be showcasing the 4420 and 4430 on Stand 3-B115 of the ISE Show, which takes place in Amsterdam between Feb. 11 and 14.
For more information, please visit genelecusa.com.
